SF-99 Servo Pin Bore Repair System

F4

For use with Ford 4EAT-F (F4A-EL) Transaxles

To release the Intermediate/Overdrive Band for the 2-3 shift on Ford's 4EAT-F, 3-4 Clutch oil is applied to the inside of the servo piston.  The 3-4 clutch oil, with the aid of the servo return spring, overcomes apply oil, forcing the servo outward and releasing the band.  The problem is that as the servo applies and releases, the pin wears the case.  This wear in the case creates a gap through which 3-4 clutch oil leaks, causing a lack of apply pressure to the clutch and release pressure on the servo.  With this loss of pressure, the life of both the 3-4 clutch and the Band, even after a rebuild, is seriously shortened.

The F4 kit contains tooling necessary to repair the 2-4 servo pin bore.  The F4 is a BLUE series kit and is available as a Master or Sub kit.

Instructions:

(Requires Acrobat Reader)

Northland Transmission
105 East Poplar Avenue - Cameron, WI 54822
Phone: 715-458-2617 - Fax: 715-458-2611 - EMail: natstran@chibardun.net